Special 30×40 cm table scales

D34 weights are built with the smallest standard sized surface of 300X400 mm.
Because of this, it’s possible to use scales with a built-in display, although it’s also possible to order smaller scales if necessary.
We recommend placing these weights on a table or a counter top, rather than on the floor.
The weights are designed for loads between 10 kg and 60 kg, with an accuracy of 1-20 grams.


The weight of the F34J5478 makes it suitable for a variety of uses.
It’s designed for weighing large packages or several small packages at the same time, with the basic 30/10F34J5478 model suitable for weights of up to 30 kg.
The weight can be upgraded to higher or lower loads as needed and is accurate to within 10 grams.

כושרי שקילה ואבחנה סטנדרטיים לבחירה

אם הדרוש לך אינו מופיע בטבלה - מומלץ להתייעץ עם נציגנו לגבי הפתרון המתאים
דגם כושר שקילה (ק”ג) אבחנה (גרם)
10/1D34J5478 10 1
10/2D34J5478 10 2
20/1D34J5478 20 1
20/2D34J5478 20 2
20/5D34J5478 20 5
30/2D34J5478 30 2
30/5D34J5478 30 5
30/10D34J5478 30 10
60/5D34J5478 60 5
60/10D34J5478 60 10
60/20D34J5478 60 20

Available upgrades

Improved red LED display screen.
Stainless steel transducer and weighing head.
The weighing head an be upgraded (with external connections, communications, sessions, etc.).
Can cater to very high or low readings.
Built-in wheels to move the weight.


Surface dimensions: 300X400 mm.
Stainless steel top tray (the blue cover in the picture is a scratch sticker).
The surface is painted with a zinc primer and an upper color.
Standard weighing capacity of 10-60 kg.
Accuracy of 1-20 grams.
Weighing head is a J-5478 plastic suitcase with a backlit LCD display.
The weighing head is connected with a stainless steel column to the weighing surface in the middle of the wall (300 mm wide).
Aluminum center transducer.
Transducers are sealed from dust and protected from water.